How To Clean Rubber Gym Floor?

How To Clean Rubber Gym Floor?

If you’ve been to any gym lately then you know that the floors are coated in rubber. As beneficial as this may be for when people are working out, it makes keeping the floors clean an arduous task. Many people don’t realize the importance of keeping this type of surface clean and end up with bacteria build-up and other nasties lurking around.

So, there is nothing worse than walking into a gym and seeing a dirty rubber floor. Not only does it look bad, but it can be a health hazard, too. Thankfully, cleaning a rubber gym floor is not difficult at all. In fact, with just a few simple steps, you can have your floor looking as good as new in no time! Keep reading for more information. 
How To Clean Rubber Gym Floor

What Is A Rubber Gym Floor?

A rubber gym floor is exactly what it sounds like. It’s a type of surface that can be found at many gyms, fitness centers, and other places where people might exercise or play sports. These floors are typically made from rubber mats that are interlocking and fitted together to cover an entire room. Rubber gym floors may also contain the same material throughout the whole floor.

Rubber gym floors are made either entirely of rubber or have some parts covered with this material for increased durability. The reason they’re so long-lasting is that they’re resistant to things like mold, mildew, cracking, skipping, splitting, and peeling. They’re also resistant to heavy wear and tear, including scratching and scuffing. Rubber gym floors are also available with specialized surfaces, including ones that are textured for extra grip.

What Are Some Tools And Materials Needed To Clean Rubber Gym Flooring?

Rubber flooring is quite easy to clean, but it’s always a great way to prepare oneself before you begin. Here are some useful resources and tools to help you succeed.



Vacuum or broom.

Mop (nylon, microfiber, or sponge).

Scrubbing brush with soft bristles.

Buffing machine.


A cleaning agent that isn’t acidic.

Dish soap that is mild (without moisturizers, bleach, or oils).

Finish and sealant for rubber floors (optional).

Which Rubber Gym Floor Cleaner Is The Best?

A pH-neutral cleanser, commonly blended with warm water, is the ideal cleaning agent for rubber flooring. It will enable you to wash and clean the floor thoroughly without harming it with nasty chemicals or acidic agents.

You have two alternatives when it comes to floor cleaners: homemade or store-bought. Let’s just get right to the point.

The Best Rubber Gym Floor Cleaner From The Store:

Employing a store-bought elastic flooring cleaner disposes of all of the speculating, which is why it’s such a prevalent alternative. Specialized rubber floor cleaners can purify, degrease, and evacuate wax from the floor. You won’t need to weaken a store-bought cleaner as much as you’d a hand crafted cleaner. In the event that you’re stressed approximately unsafe chemicals and the security of cleaning items, we have a low-odor, biodegradable cleaner and degreaser for you. You’ll be able clean approximately 3000 square feet per gallon, which suggests you’ll get a part of utilize out of it.

The Best Rubber Gym Floor Cleaner Homemade:

You may always manufacture your own cleaner if you don’t want to use store-bought cleaners or simply prefer to do things yourself. You can prepare a variety of safe, easy, and efficient handcraft floor cleaners with basic household ingredients found in the kitchen and beneath the sink.

Here’s a recipe for a rubber flooring cleaning that works:

1 gallon of hot water.

1 cup dishwashing liquid (without oils, bleach, or moisturizers).

Lemon juice or 5-10 drops essential oil.

Note: You may have to sweep the floor with water and soap several times and let the area air out to eliminate the scent of rubberized flooring off-gassing.

A weak vinegar and water combination is the best option if you really want to concentrate on sanitising the floor. 

How To Clean Rubber Gym Floor: A Step-By-Step Guide:

To know how to clean rubber flooring, there is a step by step instruction below:

Step 1: Sweep The Floor

First and foremost, you must brush away any dirt or debris that has gathered.

You can use a reliable sweeper for this stage, but there are other characteristics to consider if you would like to simplify things with a vacuum:

To prevent sticking the rubberized floor, pick a vacuum with no beater brush. If you don’t have any other options, a soft blades brush is the best option.

It’s also a great idea to choose a vacuum with strong suction to guarantee that all the dust is removed.

Step 2: Clean Rubber Flooring On The Spot

Take very good care of any conspicuous locations that need additional TLC before doing a full clean for the entire floor. Set-in stains are usually removed by scrubbing aggressively with a soft toothbrush.

If you own an industrial gyms, you may have bothersome stuck-on gum that has to be scraped away gently with a scraper. Scrapers made of metal should be avoided since they can scratch surfaces. 

Step 3: Mop The Floor

When it’s time for a thorough cleaning, bring out the mop. For this, we recommend a polyamide, microfibre, or sponges mop. Prevent soaking the flooring that much when mopping, especially if it’s constructed of rubberized surfaces with a lot of gaps where moisture might leak through.

Make careful to replace the soap and hot water mixture often to avoid cleaning with contaminated water. That’s exactly what you’re trying to avoid!

After you have a tremendous region to clean quickly, a clean and bucket will not be sufficient. Utilize a mechanized floor scrubber or buffing machine with a contact cushion or delicate nylon brush for genuinely heavy-duty cleaning or for colossal spaces. This will make cleaning less demanding and speedier on an everyday premise.

Step 4: Allow For Drying On The Floor

The main thing you have to do next allows the flooring to dry completely by leaving it alone for about 4-6 hours. If this isn’t possible, then at least give your rubberized floor plenty of time for the moisture in the air to dissipate and not leave any spots or streaks when wiping clean with a cloth.

Step 5: Buff and Polish

After everything has dried sufficiently, it’s now time to buff the floors using a damp fabric, which will make it highly reflective and even more durable! It’s also worth mentioning that by cleaning your Rubber Flooring like this regularly (ideally once a week), you can extend its life by years! 

How Do You Seal Rubber Flooring: A Step-By-Step Guide:

There are things you need to know about how to seal rubber flooring. Here is the step by step instruction below:

Step 1: Prepare The Surface

You’ll want to ensure the surface has completely dried before applying any kind of sealant, otherwise, it won’t adhere properly or at all. When this happens, you’ll be wasting your time and money on materials that probably aren’t even necessary for the job!

A good rule of thumb is to allow 24 hours after washing before applying anything. Just make sure everything has time to air dry in between coats if you’re using a specific product like an epoxy-type coating. This will prevent nasty chemical reactions from taking place where they shouldn’t be because it’s supposed to go over another layer!

Step 2: Apply The Initial Layer

The next step would be to apply the initial layer of paint, although it’s optional. If you do decide to put on a base coat, make sure it’s dry before moving onto the actual rubberized flooring paint or primer. You should use multiple coats if possible. Three is usually enough to get the best results!

Step 3: Apply Rubberized Flooring Paint

Rubberizing your floor is something that should not be taken lightly. If you don’t do it right, you’ll end up with gaps that were filled in by the previous step and before long, your shiny new gym floor will start looking patchy! Make sure everything was cleaned properly beforehand too!

You could even go ahead and make things easier for yourself by covering the entire surface in a blanket. This will prevent splashing and make life a whole lot simpler!

Step 4: Allow The Floor To Dry

Once you’ve finished all of this, allow everything to dry overnight. It’s vital that the rubberized flooring paint be completely dry before applying another layer otherwise, problems such as bubbling and chipping will occur due to moisture of excess paint beneath the new one!

Step 5: Apply Another Layer Of Rubberized Flooring Paint If Needed:

If you feel like two coats of paint isn’t enough (and we don’t blame you), then feel free to apply another one if necessary after giving it time to dry once more. Three is usually recommended but some people go for four or even five! This is entirely up to you though, although more doesn’t necessarily mean better in this case.

What Are The Cleaning Dos And Don’ts For Rubber Flooring?

What are the cleaning dos and don’ts for rubber flooring? Rubberized floors must be cleaned regularly, but it really depends on the type of activities being undertaken. If you have a sports floor with equipment traffic, then expect to clean more often than you would if having it just for recreation!


As mentioned above, rubberized floors need to be constantly hoovered, mopped, or swept. The use of a vacuum cleaner is ideal because it doesn’t create much friction between the head and rubbery surface.


Rubberized floors are susceptible to oils and greases, so avoid using harsh chemicals on them. This includes petrol-based cleaners! Also don’t scrub at the floor with wire brushes or steel wool pads as this will result in permanent dulling that can only be fixed by sanding down the entire thing!

What Are Some Other Methods To Clean Rubber Gym Floor?

Method 1: Make Use Of An Automatic Scrubber

Choose An Automated Floor Scrubber Using Soft Bristles: 

If you want to clean your rubber gym floor with an automatic floor scrubber, make sure you choose one with soft bristles. Scuff marks on rubber flooring can be caused by using a floor scraper with rough, stiff bristles. As a result, getting a soft brush scrubber to maintain the rubber material is critical.

Scrubbing with a scrubber is a good alternative since it distributes clean water while sucking up filthy water as you brush.

Automatic floor scrubbers range in price from $85 for a modest, home use unit to $1,000 for a machine with industrial capabilities.

Fill Your Scrubber With Warm Water As Directed On The Package:

You’ll add hot water to most automated scrubbing machines by removing a container on top of the device and putting in the amount of water specified in the user manual. However, because every scrubber brand and model is different, make sure you follow the directions for your individual scrubber.

The use of warm to hot water kills more germs than the use of cold water.

Every Fifth Cleaning, Use A Floor Cleaner:

If you haven’t used floor cleaner in a while, you may add a tiny quantity to the machine (or to the floor, depending on your machine’s instructions) together with the heated water. However, if you’ve recently washed the rubberized gym floor with a neutral pH floor cleanser or dish detergent, don’t add any more since the soapy solution may still be on the floor, preventing the scrubber from taking pollutants out.

As a general guideline, just use floor cleaner with your scraper every fifth clean. While using cleaner every day while mopping is typically safe, the scrubber makes more attempts to clean the flooring and can bury cleaning fluid residue deeper into the absorbent rubber floor.

Scrub The Whole Rubber Gym Floor Area With Your Floor Scrubber:

Plug in your automated scrubber once you’ve supplied water and washing substance (if necessary). Then, carefully move the scrubber across the whole ground to make sure that every area is clean.

You may have to physically push a button to discharge water and then another to suck up the water, depending on the manufacturer and kind of scrubber you’re utilizing. Before using the scrubber, make sure you read the directions thoroughly.

Cleaning Your Rubber Gym Floor With The Scrubber On A Daily Or Weekly Basis:

Use your automated scrubber at least once a week to maintain your gym floor clean and sanitary. If your gym has a lot of foot traffic, use the scrubber on a regular basis to keep the floor clean and free of germs.

While using an automated scrubber on a regular basis is typically safe, certain rubber gym flooring is porous and soft. If this is really the situation, utilize your scrubber every day or once a week to maintain the floors clean, and mop in between.

Method 2: Removing Germs, Odors, And Stains

Vacuum The Floor With A Brush-Style Rolling Vacuum:

For a more thorough clean than with a standard vacuum, choose a brush-style rolling vacuum. Use this type of vacuum to suck up large particles and all dust and debris.

Vacuuming is beneficial for removing pet hair as well as germs, odors, and stains from rubber gym flooring surfaces such as those made of recycled tires.

Steam Clean The Floor With A Commercial Steam Cleaner:

Steam cleaning the floors is necessary to sanitize them effectively. You can do it either with your own steam cleaner or using a commercial steam cleaner service. If you opt for the latter option, make sure you request disinfectant by itself (not mixed with water) since even diluted disinfectant typically doesn’t kill germs on porous surfaces such as rubber.

Steam cleaner services typically come with several cleaners (such as floor cleaner and deodorizer) in addition to disinfectant, so make sure you request only disinfectant rather than a mixture of cleaners and disinfectants.

You can use the steam cleaner on all types of rubber gym floors except those made completely from rubberized recycled tires since these may react adversely to the steam and emit an odor when heated.

Scrape Stuck-On Objects Off The Gym Floor With A Scraper:

Use a scraper to remove stuck-on objects such as gum, spilled food, and melted candy. A manual scraper works best for this task since an automated floor scrubber machine can’t handle it safely.

Continually dry the cleaning area with paper towels so you don’t have to use any type of rinsing substance. This is suitable for all types of rubber gym flooring.

A Homemade Solution To Sanitize Your Rubber Gym Floor: 

If you don’t want commercial products on your gym floor, you can use standard household solutions (such as bleach) to sanitize them thoroughly.

Just keep in mind that bleaches are corrosive, so read the manufacturer’s instructions carefully and don’t use paper towels or any other type of absorbent fabric to dry the area after using the solution. And never mix cleaning products with one another (for example, creating a mixture of bleach and ammonia).

Use A Dry Rubber Gym Floor Cleaning Powder:

While rubber gym floors are easily cleaned with water solutions, there are times when the completely dry powder is better suited for scrubbing stubborn stains out. You can purchase these types of powders at hardware stores.

Powders can clean stains from rubberized recycled tires since they don’t react adversely to the powder.

For particularly tough stains that a commercial product can’t get rid of, use a dry rubber gym floor cleaning powder following the manufacturer’s instructions and spread it on the stain before scrubbing with an automated scrubber machine.

How To Clean Gym Mats?

Cleaning gym mats is simple if you have the right equipment. All of your gym mats are made from rubber so they shouldn’t be cleaned with standard cleaning products or water solutions since this will damage them over time.

Instead, use any type of commercial mat cleaner on your rubber gym flooring mats. While some manufacturers produce specific cleaners for their own brand of the mat, you can also use a general-purpose floor cleaning powder that isn’t intended for rubber floors.

It’s best to sprinkle some of the powder onto the matted area at a time instead of applying it all at once. Keep in mind that the powder should only be used on “closed cell” foam pads (the black or zebra-striped ones) not “open-cell” foam pads (the blue ones).


When Should The Floor Be Cleaned?

It’s important to clean a rubber gym floor on a regular basis. In fact, some companies recommend that the floor should be cleaned at least once a week using products that have been tested and approved by the manufacturer. This is because these floors attract more dirt than traditional floors due to their durability and it’s a lot harder to remove this gunk from the material. Plus, it can be unsafe for people who use your facility if they’re walking around while barefoot or in their socks.

What Are The Benefits Of Having A Clean Floor?

Keeping your rubber gym floor clean has not only aesthetic benefits but also many health-related ones as well. For instance, if you allow bacteria to build up then it will obviously spread to whatever is in the area, including people. In order to ensure that your floor stays germ-free make sure it’s always clean and dry. This will prevent mold from growing and reduce the risk of things like the athlete’s foot from forming.

In addition, you want to maintain a clean fitness center because it makes a better impression on potential members and clients. If you don’t have a clean facility then people won’t feel comfortable working out there regardless of how nice things might look on the surface.

How Often Should You Clean Rubber Gym Floors?

Keep in mind that there are very specific cleaning guidelines for the different types of rubber gym flooring. For example, you shouldn’t clean open-cell foam padding with dry powder or any type of commercial cleaner since this can cause the absorbent fabric to deteriorate rapidly.

Rubber gym floors are suitable for cleaning with water solutions only, so be sure to follow the manufacturer’s instructions when it comes to their particular product use.

If you have questions about how often your rubberized surface needs attention, contact your flooring vendor directly since they most likely have access to specific information on how best to maintain separate types of rubber gym floors.

Since rubber flooring is easily damaged, always contact your flooring vendor before attempting to clean or sanitize it yourself.


In summary, rubber gym flooring is a popular choice for many gyms and fitness studios. The rubber material is durable and easy to clean. In order to keep your rubber gym floor looking its best, we recommend following these simple tips: First, sweep or vacuum the surface regularly to remove any dust or debris. Next, use a damp mop to clean the surface. Be sure not to saturate the floor with water, as this could cause damage. Finally, dry the floor completely after cleaning. A squeegee can be helpful in removing excess moisture. By following these tips, you can keep your rubber gym floor looking great for years!

Leave a Reply